12.09.2020, 19:51
Hello,
thank you very much for your work and for your program.
As I have commented other times on the forum I use it to prepare and to see my bike routes.
Recently I bought a GPS clock that records the routes and the heart rate. In the gpx file it appears like:
<trkpt lat="51.626823" lon="-5.75026">
<ele>593.0</ele>
<time>2020-09-12T10:59:05.000Z</time>
<name>Position 1</name>
<extensions>
<gpxtpx:TrackPointExtension>
<gpxtpx:hr>65</gpxtpx:hr>
<gpxtpx:speed>2.12</gpxtpx:speed>
</gpxtpx:TrackPointExtension>
</extensions>
</trkpt>
Would it be possible add to RouteConverter to read this Hearth Rate data and be seen on chart?
Nowadays, ther is another program to do this, GPXSee, but it is not as good as RouteConverter.
Thanks a lot.
thank you very much for your work and for your program.
As I have commented other times on the forum I use it to prepare and to see my bike routes.
Recently I bought a GPS clock that records the routes and the heart rate. In the gpx file it appears like:
<trkpt lat="51.626823" lon="-5.75026">
<ele>593.0</ele>
<time>2020-09-12T10:59:05.000Z</time>
<name>Position 1</name>
<extensions>
<gpxtpx:TrackPointExtension>
<gpxtpx:hr>65</gpxtpx:hr>
<gpxtpx:speed>2.12</gpxtpx:speed>
</gpxtpx:TrackPointExtension>
</extensions>
</trkpt>
Would it be possible add to RouteConverter to read this Hearth Rate data and be seen on chart?
Nowadays, ther is another program to do this, GPXSee, but it is not as good as RouteConverter.
Thanks a lot.