+- RouteConverter Forum (https://forum.routeconverter.com)
+-- Forum: Users (https://forum.routeconverter.com/forum-17.html)
+--- Forum: English: Discussions (https://forum.routeconverter.com/forum-12.html)
+--- Thread: Suggestion for evolution (/thread-905.html)
Suggestion for evolution - aristide - 31.01.2011
Hi,
RouteConverter is a great tool which makes me discover the OpenSteetMap project. ( The three buttons at the upper rigth)
The OSM project allows to export a map as an svg file. This map is free and can be used with usual Creative Commons Attribution-ShareAlike licence.
Unfortunately, within OSM, it is not possible to export a map including a track you uploaded.
As RouteConverter show the track in the three different rendering of OSM, would it be possible in Routeconverter to export the SVG file of what is shown : map plus track ?
This woudl be be very helpful. It would allow to publish a map with track(s), with Creative Commons protections.
For sure, this is not the main target of RouteConverter, but it really would be attractive.
Thank you for reading this post until the end. Be free to tell your thoughts.
RE: Suggestion for evolution - routeconverter - 31.01.2011
(31.01.2011, 14:53)aristide Wrote: The OSM project allows to export a map as an svg file.
Do you have a link for more information about this? Is this available in the OpenLayers API?
(31.01.2011, 14:53)aristide Wrote: As RouteConverter show the track in the three different rendering of OSM, would it be possible in Routeconverter to export the SVG file of what is shown : map plus track ?
Frankly: I don't know. Neither how the SVG stuff works nor whether it's possible to paint tracks on SVG rendered maps. Any hints where to get more information is appreciated.
RE: Suggestion for evolution - aristide - 01.02.2011
Hi Christian,
Exporting maps :
In the home page of http://www.openstreetmap.org/ there is a thumbnail "Export"
Cliquing on it offers the possiblity to select the area, and the format. For the "Image Mapnik" format, in "Options" the pull down menu offer various formats including SVG.
I did a downlmoad of a small area as an SVG file. I succeded in open it with Inkscape, even if the file is big, and I had to be be patient.
Inkscape is an Open Source vector graphics editor. Refer to : http://inkscape.org/
More information about export is here : http://wiki.openstreetmap.org/wiki/Export
In the other hand, I did test to upload a track, I didn't succeded and finaly found this post in the forum.
The topic is : Can not see the GPS track
Refer to the thread : http://help.openstreetmap.org/questions/938/can-not-see-the-gps-track
It is stated :
"... Bear in mind that OSM is a place for creating an objective, accurate map of the world, not for showcasing your own particular favourite routes...."
So, I went to the conclusion I can't get an svg file including the map and my track.
The API
Regarding the possibilities of the API, I should say I am a common user and I am not able to understand the possibilities and the limits of an API, neither how to use it.
Googling OSM site gives this page : http://wiki.openstreetmap.org/wiki/API_v0.6/Command_Overview
in which there is an "export" item.
For sure it is possible to download the map as an SVG, and draw the track over the map using Inkscape. But if I can upload the track (RouteConverter do it) and then download the map plus the track I get the incredible advantage of NO possibility to do mistakes while drawing the track. Plus a interesting reduction of the effort to get the result.
The objective is to end with a paper copy of the track over the map, and to distribute it under Creative Commons licence.
Best regards.
Bernard.
RE: Suggestion for evolution - routeconverter - 01.02.2011
(01.02.2011, 12:11)aristide Wrote: Refer to the thread : http://help.openstreetmap.org/questions/938/can-not-see-the-gps-track
It is stated :
"... Bear in mind that OSM is a place for creating an objective, accurate map of the world, not for showcasing your own particular favourite routes...."
So, I went to the conclusion I can't get an svg file including the map and my track.
That would be my conclusion, too.
(01.02.2011, 12:11)aristide Wrote: The objective is to end with a paper copy of the track over the map, and to distribute it under Creative Commons licence.
You have three more options to achieve this:
- print the track on a OSM map to a PDF printer
- do a screenshot of a track on a OSM map
- save an HTML page, open it in a webbrowser for printing/screenshot/whatever