26.05.2011, 19:08
Yes, upload was OK.
Starting RouteConverter 2.4.exe and drag&drop the file into it, I see a *.gpx, containing a waypoint list (20 points) and a route (75 points).
Printing map and route (of the route, not the waypoint list) to a pdf printer gives me a 16 page pdf. Start at Laurel St. (point 65), end at Laurel St. Note that no line was marked in the position list before printing.
Selecting position 1 in the position list of the route gives me a 265 pages printoout.
Switching to the waypoint list gives me a fine one page map of the waypoints as expected.
Changing the Type: of this waypoint list to "Route" gives me a fine 13 pages printout, starting at Beecroft Rd, end at Flora St (this is correct, the waypoint is named Westmoreland St) but without map.
Deleting the 2nd position list within the file gives me a 63 pages printout with correct start and end but without map.
Re-loading your original file and deleting the 1st position list within the file gives me a 78 pages printout from Beecroft Rd (correct) to Laurel Rd (incorrect).
Re-startung RouteConverter, deleting the 2nd position list within the file, changing Type: of the remaining waypoint list to "Route", saving the result as file (tomtom 5 route), re-loading the file (displayed as route) gives me a one page map with the waypoints...
curious... problem confirmed, but not solved...
Starting RouteConverter 2.4.exe and drag&drop the file into it, I see a *.gpx, containing a waypoint list (20 points) and a route (75 points).
Printing map and route (of the route, not the waypoint list) to a pdf printer gives me a 16 page pdf. Start at Laurel St. (point 65), end at Laurel St. Note that no line was marked in the position list before printing.
Selecting position 1 in the position list of the route gives me a 265 pages printoout.
Switching to the waypoint list gives me a fine one page map of the waypoints as expected.
Changing the Type: of this waypoint list to "Route" gives me a fine 13 pages printout, starting at Beecroft Rd, end at Flora St (this is correct, the waypoint is named Westmoreland St) but without map.
Deleting the 2nd position list within the file gives me a 63 pages printout with correct start and end but without map.
Re-loading your original file and deleting the 1st position list within the file gives me a 78 pages printout from Beecroft Rd (correct) to Laurel Rd (incorrect).
Re-startung RouteConverter, deleting the 2nd position list within the file, changing Type: of the remaining waypoint list to "Route", saving the result as file (tomtom 5 route), re-loading the file (displayed as route) gives me a one page map with the waypoints...
curious... problem confirmed, but not solved...
--
Matthias
Matthias